Measuring for a new faucet, sink or pot filler

For a faucet

• Number of holes and the spacing between them (for example 8 in centers for a bridge faucet).
• Deck thickness: most faucets fit counters up to about 1-1/2 to 2 in thick. Thick stone may need longer shanks.
• Clearance above the counter to any shelf, window sill or cabinet.
• Supply lines: 3/8 in compression is common under the sink. Check your shut-off valves.

For a sink

• Cabinet width inside and out, and whether it's an apron-front base.
• Counter material: undermount sinks need stone, quartz or solid surface.
• Drain position and the space needed for a disposal.

For a pot filler

• A pot filler needs a cold-water line in the wall behind the range. It's best roughed in during construction or a remodel.
• It's usually mounted a little above the cooktop so the tallest pot fits under it. Check the maker's suggested height for your range.
• The arm should reach the front and back burners when extended, and fold flat when closed.

What to send with a quote request

• Photos of the sink, counter and cabinet.
• The measurements above.
• The finish you want and any other pieces to match.